background image

22

ZOLL AED 3 Administrator’s Guide

9650-000752-01 Rev. D

Following successful completion of all self tests, the status indicator displays a 
green check (

)

 to show that all tests passed and that the AED is ready to use.

If the status indicator is blank following completion of any self test, the
ZOLL AED 3 defibrillator is not ready for use and may be defective. Remove the 
AED from service and consult the section, “Chapter 4 Troubleshooting” on 
page 29, to help determine the problem.

Self Test Functions

The following functions are verified during self tests. Table 4 on page 23 lists the 
functions that are included in each self test.

Battery Capacity

: Verifies that the battery usage indicator shows 

adequate battery capacity remaining.

Defibrillation Pads Connection

: Verifies that the defibrillation pads are 

properly preconnected to the device.

Defibrillation Pads/Battery Expiration

: Verifies that the defibrillation 

pads and the battery are within their expiration dates.

ECG Circuitry

: Tests that the ECG signal acquisition and processing 

electronics are functional.

Defibrillator Charge and Discharge Circuitry

: Verifies that the device’s 

defibrillator electronics are functional and can charge and discharge at
2 joules. The following tests also include a separate 200 joule charge/
discharge test: Battery Installation Self Test, Manual Self Test, Automatic 
Monthly Test.

Microprocessor Hardware/Software

: Verifies proper function of the 

AED microprocessor electronics and the integrity of its software.

CPR Circuitry and Sensor

: Determines that CPR monitoring and 

compression depth detection are functional (if defibrillation pads with CPR 
functionality are connected).

Audio Circuitry

: Verifies that voice prompts are working.

Automatic Self-Test Transfer

All ZOLL AED 3 defibrillators come standard with Program Management 
Onboard

TM

 intelligent monitoring technology to transfer self-test data. If 

configured, the AED can automatically transfer self-test information over Wi-Fi 
to the ZOLL PlusTrac

TM

 AED program management system or to another AED 

program management provider.

AED Passed
   Self Test

AED Failed
  Self Test

Summary of Contents for AED 3









































































Reviews: