Alarms
9650-002360-01 Rev. A
ZOLL Z Vent Ventilator Operator’s Guide
5-9
Self-Check Alarms
During power up, the ventilator goes through a Self-Check Test (a set of system tests and
checks). When the Self-Check passes, the LED array turns green and the Start Menu displays,
indicating that the ventilator is operational.
If the Self-Check does not pass, then one or more Self-Check alarms present to identify the
nature of the problem.
Warning!
Unresolved Self-Check alarms alert the user to issues with the device that can affect its
performance. Users should carefully consider the risk of using the device with these
alarms before using it with a patient.
Note:
The alarm priority is dependent on whether an alternate power or gas source is
detected.
These alarms clear when the condition reported by the alarm is corrected. (for example, the
external power is connected or the compressor inlet is cleared.)
Note:
Self-Check alarms cannot be preemptively muted or muted at Start Up. Additionally,
these alarms cannot be turned OFF or adjusted.
The table that follows lists the Self-Check alarms.
Gas Intake Restricted/
Fault/Failure
Gas Intake Blocked or Restricted
1030
2030
3030
3031
Alarm Title
Group
Service Code
Alarm Title
Group
Service Code
Communication
Internal COMM CPU - SPM
1171
1473
Internal COMM CPU
1471
1475
Internal COMM SPM
1175
1472
1474
