1 - 7
Hardware/Software
Section 2- Installation the Audio Plus 3200
2.2 Software I/O Setting
We also provide software for changing Sound Card 's I/O without jumper
setting.You can find the program 'APINIT.EXE' in install path. After runing
you will see all I/O settings in the main manu. Using arrow key to move to the
item that you want to change and press ENTER key to execute. To quit or save
change,press ESC key and display will show as following:
save setting & exit
quit without saving
Program will automatically update file "CONFIG.SYS" if selecting 'save setting
& exit '.Otherwise,it will remain unchange. Once you save the change,a new I/O
setting will be got ever since.
2.3 DOS Utilities Install
INSTALL.EXE is the program that helps you easily install the Audio Plus
3200's supported utilities programs from diskettes to your hard disk.
Insert the Audio Plus 3200 Diskette into drive A:. Change to drive A at DOS
prompt, type in
A:\ > INSTALL [Enter]
It will make directory ( AP3200 ) on your Harddisk C: driver, and install the
utilities programs into C:\AP3200>.
2.4 Windows Application Install
To setup the Media Rack software under Windows , follow these steps:
1. Start Windows 3.1.
2. From Program Manager, select File and then Run... from the pull-down menu.
3. At the Command Line:, type in A:\WINAPP\SETUP.EXE (A: is the drive
you have put the Media Rack Software disk into).
Program will automatic launch Windows and install all of Windows applications
and device to hard disk path that you specify.
