1 - 10
Hardware/Software
Section 3- Installation CD-ROM Drive
4. Connect the audio cable that CD-ROM manufacturer supplied from the CD-
ROM drive to the appropriate CD-audio input connector(J1 or J3 or J5) on
the Audio Plus 3200, please refer to your CD-ROM installation guide about
audio cable connecting.
5. Installing the CD-ROM device driver provided by the CD-ROM manufacturer.
After the installation completed, reboot your system, you'll have your CD-ROM
device connected to your computer. You can refer next section to get details.
3.2 Installing CD-ROM Software Driver
You need to install two CD-ROM software drivers:
1. Install CD-ROM's device driver provided by CD-ROM manufacturer in
CONFIG.SYS file.
2. Install Microsoft CD-ROM Extensions program (MSCDEX.EXE) in
AUTOEXEC.BAT file.
We show the examples for each manufacturer supplied CD-ROM's device driver
in CONFIG.SYS file like below :
MITSUMI
(For LU005)
DEVICE=C:\MITSUMI\MTMCDS.SYS /D:MSCD001 /P:340
(For FX001 and FX001D)
<Polling Mode>
DEVICE=C:\MITSUMI\MTMCDAS.SYS /D:MSCD001 /P:340
<Software Interrupt Mode>
DEVICE=C:\MITSUMI\MTMCDASE.SYS /D:MSCD001 /P:340 /I:11
PANASONIC (For 562B and 563)
DEVICE=C:\PANASONI\CDMKE.SYS /D:MSCD001 /P:340
SONY (For CDU 31A and 33A)
<Polling Mode>
DEVICE=C:\SONY\SLCD.SYS /D:MSCD001 /B:340 /M:P /V /C
<DMA Mode>
DEVICE=C:\SONY\SLCD.SYS /D:MSCD001 /B:340 /M:D /T:3 /T:11 /V /C
