3 / 6
Programming Instructions
How To Use
UNLOCK the door from inside
UNLOCK the door from outside
LOCK the door from outside
LOCK the door from inside
Master/ User
code
Rotate the thumb turn to
Unlock position.
Auto Re-lock Mode
In Auto re-lock mode, the bolt will
extend out automatically in 30 seconds
after unlocking.
Auto lock function is off by default.
Manual Mode
Press any key on keypad for 2 seconds.
Manual Mode
Rotate the thumb turn to Lock position.
Programming Basic
A. Master Code
The default master code is 12345678. This code must be changed prior to programming the lock.
The Master Code is used for programming and for feature settings. It will also unlock the lock.
C. Wrong Entry Limit
After 10 unsuccessful attempts at entering a valid PIN code, the unit will shut down for 3 minuets.
E. Battery Indicator
If you hear 10 beeps corresponding with 10 red flashes after pressing any key or lock and unlock the door, that's an indication that the
batteries need to be replaced soon. Please replace with 4 new AA alkaline batteries and do not mix old and new batteries. All settings are
retained in the memory when the batteries are removed and replaced.
F. Key Override
D. Unlock with Fake code
83618
137192
14710
password
Random digits
User can prevent pin code exposure from strangers by entering random digits before or after pin code.
a. Forward number sequence
To unlock:
1. Insert the key into the cylinder.
2. Rotate the key 90°counterclockwise to unlock.
3. Rotate the key 90°back to remove the key.
To lock:
1. Insert the key into the cylinder.
2. Rotate the key 180°clockwise to lock.
4. Rotate the key 180°back to remove the key.
b. Backward number sequence
c. Repeat number sequence
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
2
2
2
2
2
2
2
2
2
3
8
6
5
If
Then
and
3
8
1
9
6
5
1
9
3
8
6
5
d. Contain existing code sequence
Code is 4-10 digits.
Both master code and user code do not support the following sequence.
B. Code Format
IMPORTANT: READ this before proceeding to programming.
Key Override can be used to gain access when the batteries are completely dead or when no valid User Code is known.
IMPORTANT NOTE: Please keep at least one copy of the backup key in secure location outside of your place.
#
