24
Pure Airbox Home 500 “S”
1- Slide the rear exterior panel of the unit
along its track, about 5 cm vertically, and
then outwards
2- To access inside, unscrew the 6 screws
on the interior metal panel with a Phillips
screwdriver
3 - Identify filters
4 - Remove the pre-filter by sliding it along the
guides
5 - Remove the GRSystem filter by the
handle, lifting it about 2cm and pulling it
outwards (always sliding the bottom flap
of the filter under the lateral guides)
6 - Loosen the 4 setscrews holding the
absolute filter in each corner so that it can be
fully removed along the guides
PRE-FILTER
GRSYSTEM
ABSOLUTE FILTER
Fan
OPENING INSTRUCTIONS AND FILTER REMOVAL
IMPORTANT:
·
It is recommended to use gloves when replacing the filters to avoid any
contact with adsorbed substances.
·
Always take the filters by the frame. Never touch the filter surface
so as not to damage it.
handle
flap
Summary of Contents for Pure Airbox Home 500 S
