5
MJOLNIR
S:t Persgatan 23, 602 33 Norrköping Sweden
contact@thor-zone.com thor-zone.com
THOR ZONE
+5V
D
GND
LED-TO-MOTHERBOARD CABLE (4-PIN)
OR
+5V
D
GND
LED-TO-MOTHERBOARD CABLE (3-PIN)
IN
1
Attach the LED strips to the Core with four M3x4 screws
2.
Connect the LED strips to each other, use the LED-to-LED cable
NOTE:
Connect the IN-port on one LED strip to the OUT-port on the other
3.
Connect the LED strips to the Motherboard, use the LED-to-Motherboard cable
NOTE:
Connect the IN-port on the LED strips to a 5V dRGB header
•
There are 2 available LED-to-Motherboard cables (3-pin and 4-pin)
TIP:
Use one that best fits your motherboard’s 5V dRGB header
•
5V DIGITAL ONLY - AVOID 12V/ANALOG HEADERS AT ALL COSTS!
•
CORRECTLY CONNECT POWER, DATA AND GROUND!
INSTRUCTIONS
4x
M3x4
SCREWS
•
Hex key (size: H2.0)
TOOLS
MJOLNIR R — GODRAYS
