ZONEMASTER MAXIPOINT V2 DAMPER CONTROL SYSTEM
- Installation Manual
5
Main module and extension module can be located in different positions
and connected via a cable with left latched plugs on both ends as shown
in Figure 3. Touchpad is connected to the ‘T’ port on main module using a
cable with left latched plugs.
Up to 4 touchpads can be joined in a system. The 4 touchpads are
connected to each other with a double left latched adaptor.
Figure 2: MaxiPoint V2 with Extension Module and 8 Zone Ports
Figure 3: MaxiPoint V2 with Main Control Module
and Extension Module, 4 Touchpads and 16 zone
ports (Dampers not shown)