6. In your editor, modify "
BoxIPAddress
" field from "0.0.0.0" to "192.72.214.100".
Leave
other options as default and do not change their values
. When done, save this new
file and quit from your editor.
Please note, in this step you must specify an IP address
which is valid on Segment B, such as 192.72.214.100 in this example, rather than
192.72.214.68.
7. Type, for example, "tftp 192.72.214.68 put config.txt" to save this new configuration back
to print server.
8. Move the print server back to the Segment B.
9. Done!
69
