4.
C
onfiguration from
E
mbedded
W
eb
S
erver
Overview
The MFP server contains an embedded web server that can be accessed through a
supported web browser on a LAN, for example, IE 5.01, Netscape 6.2 or above is
recommended.
The embedded web server provides access to configuration and management pages for the
MFP server and the connected peripheral device.
Using Embedded Web Server
Before you can use the embedded web server, the MFP server must be configured with an IP
address. The default IP address of MFP server is
192.168.0.10
and the subnet mask is
255.255.255.0.
Status Menu
Enter the IP address of the MFP server as the URL, for example,
192.168.0.10
. Then the
MFP server’s built-in web interface will appear in content of the web browser.
System Status
1.Click
Status
, it then appears the sub-menu.
2.Click
System
, it then as shown in the following picture.
18
Summary of Contents for ZPS2000
