33
Dynamic DNS: If you want to enable DDNS function, please select
“Enabled”; otherwise please select “Disabled”.
Provider: Select your DDNS service provider here.
Domain Name: Input the domain name you’ve obtained from DDNS
service provider.
Account / E-Mail: Input account or email of DDNS registration.
Password / Key: Input DDNS service password or key.
After you finish with all settings, please click “Apply” button and the
following message will be displayed on your web browser: Please click
“Continue” to back to previous setup menu; to continue on other setup
procedures, or click “Apply” to reboot the router so the settings will take
effect (Please wait for about 30 seconds while router is rebooting). If you
want to reset all settings in this page back to previously-saved value, please
click “Cancel” button.
2-6.Wired LAN Configuration
Before all computers using wired Ethernet connection (i.e. those computers
connect to this router’s LAN port 1 to 4 by Ethernet cable) can communicate
with each other and access internet, they must have a valid IP address.
There are two ways to assign IP addresses to computers: static IP address
(set the IP address for every computer manually), and dynamic IP address
(IP address of computers will be assigned by router automatically. It”s
recommended for most of computers to use dynamic IP address, it will save
a lot of time on setting IP addresses for every computer, especially when
there are a lot of computers in your network; for servers and network
devices which will provide services to other computer and users that come
from Internet, static IP address should be used, so other computes can
locate the server.
Suggestions on IP address numbering plan:
If you have no idea on how to define an IP address plan for your network,
here are some suggestions.
1.
A valid IP address has 4 fields: a.b.c.d, for most of home and
Summary of Contents for ZSR4124WE
Page 1: ......
