41
ESSID: This is the name of wireless network. You can type the SSID of
the network you would like to connect here.
Site Survey: When you use this wireless router as a wireless station for
Ethernet network device to have wireless capability, you have to
associate it with a working access point. Click “Select Site Survey”
button, then a “Wireless Site Survey Table” will pop up. It will list all
available access points near by. You can select one access point in the
table and it will join wireless LAN through this access point.
WLAN MAC: For some applications, you may need to designate a
specific MAC address for the router. Please enter the MAC address here.
If you are connecting the router to a computer, you can simply press
“Clone Mac address” button to fill the MAC address field with the MAC
address of your computer.
2-7-1-3. Setup procedure for AP Bridge-Point to Point
In this mode, you can connect your wireless router with another, to combine
two access points and expand the scope of wireless network, and all clients
(wired only – AP will not accept wireless clients in this mode) of two wireless
routers will think they’re on the same physical network. This function is very
convenient when you need to connect two networks between two buildings.
Here are instructions about how to connect two wireless routers together:
NOTE:
Two wireless routers must use the
same mode, band, channel
number, and security setting!
Band: Select the band you want to use, two wireless routers must use
the same setting.
Channel Number: Select the channel you want to use, two wireless
Summary of Contents for ZSR4124WE
Page 1: ......
