61
procedures, or click “Apply” to reboot the router so the settings will take
effect (Please wait for about 30 seconds while router is rebooting). If you
want to reset all settings in this page back to previously-saved value, please
click “Cancel” button.
3-2-3. Virtual Server
This function allows you to redirect a port on Internet IP address (on WAN
port) to a specified port of an IP address on local network, so you can setup
an Internet service on the computer on local network, without exposing it on
Internet directly. You can also build many sets of port redirection, to provide
many different Internet services on different local computers via a single
Internet IP address.
Please click “NAT” menu on the left of web management interface, then click
“Virtual Server”, and the following message will be displayed on your web
browser:
Enable Virtual Server: Check this box to enable virtual server, and
uncheck this box to disable virtual server.
Private IP: Input the IP address of the computer which provides Internet
service.
Computer Name: Pull down the menu and all the computers connected
to the router will be listed here. You can easily to select the computer
name without checking the IP address of the computer.
Private Port: Input the port number of the IP address which provides
Summary of Contents for ZSR4124WE
Page 1: ......
