63
Enable: Check this box to enable special applications and uncheck this
box to disable virtual server.
IP Address: Input the IP address of the computer which you want to
open the ports.
Computer Name: Pull down the menu and all the computers connected
to the router will be listed here. You can easily to select the computer
name without checking the IP address of the computer.
TCP Port to Open: This is the out going (Outbound) range of TCP port
numbers for this particular application.
UDP Port to Open: This is the out going (Outbound) range of UDP port
numbers for this particular application.
Comment: The description of this setting. Popula Applications
This
section lists the more popular applications that require multiple
connections. Select an application from the Popular Applications
selection and click “Add” to save the setting to “Current Trigger-Port
Table.”
Add:Add the setting to the “Current Trigger-Port Table.”
Reset: Click “Reset” will clear all above setting and you can set up again.
Current Trigger-Port : All the settings for the special applications will be
listed here. If you want to remove some Special Application settings
from the " Current Trigger-Port Table", select the Special Application
settings you want to remove in the table and then click "Delete
Selected". If you want remove all Special Appliacation settings from the
table, just click "Delete All" button. Click "Reset" will clear your current
selections.
Delete Selected: Please select a special application by clicking the
“Select” box of the mapping, then click “Delete Selected” button to
remove the setting. If there’s no setting here, this button will be grayed
Summary of Contents for ZSR4124WE
Page 1: ......
