67
3-3-1. Access Control
This function allows or denies computers with specific MAC address from
connecting to the network; it can also allow or deny computers with specific
IP address, protocol, or port.
Please click “Firewall” menu on the left of web management interface, then
click “Access Control”, and the following message will be displayed on your
web browser:
Enable MAC Filtering: Check this box to enable MAC address based
filtering, and please select “Deny” or “Allow” to decide the behavior of
MAC filtering table. If you select deny, all MAC addresses listed in
filtering table will be denied from connecting to the network; if you
select allow, only MAC addresses listed in filtering table will be able to
connect to the network, and rejecting all other network devices.
Client PC MAC address: Please input the MAC address of computer or
network device here, dash ( - ) or colon (: ) are not required. (i.e. If the
MAC address label of your wireless device indicates “aa-bb-cc-dd-ee-ff”
or “aa:bb:cc:dd:ee:ff”, just input “aabbccddeeff”
Computer Name: Pull down the menu and all the computers connected
the router will be listed here. You can easily to select the computer
name without checking the IP address of the computer.
Comment: You can input any text here as the comment of this MAC
address, like “ROOM 2A Computer” or anything. You can input up to 16
Summary of Contents for ZSR4124WE
Page 1: ......
