- 4 -
Hardware Installation
Before you begin, make sure all devices are power-off.
NOTE: To prevent damage to your hardware due to ground potential
differences, make sure all devices (computer, monitor, and VGA Splitter)
are properly grounded during installation.
Zonet will not be responsible for any damaged caused in this way.
Connecting the VGA
1.
Make sure that computer and monitors you are installing are powered
off.
2.
Connect the VGA cable female end into the VGA splitter’s VGA In Port.
3.
Connect the VGA cable male end into the computer’s VGA output port.
4.
Connect the monitor cable(s) into the VGA Out Port.
5.
Connect the provided AC power adapter to the power port.
6.
Power on all devices.
