12
12
03. PC Mode is a special non-ZoneVu mode of operation use to connect to a third party control system. In this
instance the RS232 port is utilised in place of the ZoneVu port.
Joystick Setup
The joystick employed in the ZVK-77D is a fully proportional X,Y,Z joystick providing the operator with independent variable
speed control of Pan, Tilt, Zoom, Focus and Iris functions.
Centre Stick
The joystick is a fully proportional type and, as such may require re-calibrating from time to time. To calibrate the joystick.
01. Press the Softkey directly adjacent to the menu option, Centre stick. A pop-up window will say ‘Push any key to
begin’
02. Press any key and follow the menu instructions. You will be asked in sequence to Pan the joystick fully right,
Left, Up, Down followed by Zoom In and Out via the joystick twist grip.
03. Finally you will be asked to release the joystick to determine its centre position.
Speed mode
Since the original ZoneVu system was introduced over 10 years ago development of Meyertech products has continued at a
pace to bringing you the latest technology and ideas. To manage this technology effectively Meyertech have always
promoted the concept of backward compatibility, ensuring new products work when installed into older systems. This concept
is vital to customers who do not have the budget to entirely replace their system every time they want to take advantage of
some new technology. Speed mode is an example of how Meyertech are managing that concept. The Basic speed mode
option is to maintain compatibility with older and existing ZoneVu products EG ZVR-510 receiver. The Advance speed mode
is an enhanced version of the Basic providing the operator with improved speed control.
Login Account Setup
Operators of the ZVK-77D are required to log-on and log-off the keyboard to operate it. There are three levels of operator,
User, Manager and Engineer. Each level can have a set of access rights configured to suit. New operators can be easily
added through the Login account setup menu.
01. From the Keyboard programming menu press the Softkey directly adjacent to the menu option, Login account
setup.
02. Press the Softkey directly adjacent to the menu option, Insert new user.
03. Enter the operators name using the alphanumeric keypad and press Enter.
04. Press the Softkey directly adjacent to the menu option, PIN, to set a Personnel Identification Number for the new
user.
05. Press the Softkey directly adjacent to the menu option, Priority to set the new operators hierarchal camera
control priority level
06. Now enter a level in the range 1 – 9 using the Numeric Keypad followed by
Enter.
Nine is the highest priority.
07. Press the Softkey directly adjacent to the menu option, Access level to cycle round and assign the options of
User, Manager and Engineer to the new operator.
