8
8
03. Now enter a PRESET in the range 0 – 999 using the Numeric Keypad followed by
Enter
You can select a Camera Preset Patrol
Placing a camera into a Preset Patrol means the camera will continuously execute a series of Camera Presets over a set
period of time. Preset Patrols are generally configured and stored by each particular camera in the system. Various types of
camera Preset Patrols exist E.G. Random, Ordered, Mimic. Suffice to say the task of the ZVK-77D is just to select them.
01. Press the Softkey directly adjacent to the menu option, SELECT PRESET PATROL.
02. Now enter a PATROL in the range 0 – 999 using the Numeric Keypad followed by
Enter
You can store a Camera Preset Preset
Placing a camera into a Preset Patrol means the camera will continuously execute a series of Camera Presets over a set
period of time. Preset Patrols are generally configured and stored by each particular camera in the system. Various types of
camera Preset Patrols exist E.G. Random, Ordered, Mimic. Suffice to say the task of the ZVK-77D is just to select them.
01. Position the camera to the position you require using camera controls Pan, Titl, Zoom and Focus. Other camera
functions E.G. Lamps may be available dependent on the type of camera installed.
02. Press the Softkey directly adjacent to the menu option, STORE PRESET.
03. Now enter a PRESET in the range 0 – 999 using the Numeric Keypad followed by
Enter
You can Copy an Image to the Police Monitor
Images displayed on your spot monitor can be copied directly to a nominated monitor designated the Police Monitor which is
a common requirement in town and city centre schemes.
01. If the menu option, COPY TO POLICE MONITOR is not currently displayed, use the Next key to find it.
02. Press the Softkey directly adjacent to the menu option, COPY TO POLICE MONITOR
You can select a Trunk
Trunks are video trunks linking one site to another site. Both sites would normally incorporate a video matrix with a number of
the remote sites video outputs being designated trunks. At the local site these trunks connect as inputs into the local video
matrix. The select Trunk function is used to select specifically one of these trunks so that cameras at the remote site can be
viewed locally via the video matrix.
01. Press the Softkey directly adjacent to the menu option, SELECT TRUNK
02. Now enter a TRUNK in the range 1 – 999 using the Numeric Keypad followed by
Enter
You can select Next Trunk
Next Trunk operates in a similar manner to Select Trunk. The difference being that Next Trunk selects the next available
trunk rather than a specific trunk.
