Safety Precautions
1. Carefully read this Product Manual prior to commencing installation and configuration.
2. Before working on this product, power it down and remove the power leads. Removing
the module or PCB’s from their environmental enclosure may cause damage to the
product and present an electric shock and fire hazard.
3. To reduce the risk of electric shock and fire hazard do not operate this product without the
protection of a suitable environmental enclosure.
4. Do not install or operate the product near water.
5. Do not install or operate this equipment outside, unless it is fitted inside a suitable
environmental enclosure E.G. IP rated camera housing.
6. Only install this equipment into a suitable environmental enclosure.
7. If work is carried out on the product with environmental enclosure panels and covers
removed ensure full electrostatic handling procedures are adhered to.
8. Ensure the product is operated in a suitably temperature controlled environment within
the specification limits.
9. Do not operate the product in humidity greater then 90%.
10. Do not drop objects of any kind onto the product when installing it. This may cause
electric shock, fire hazard or product malfunction.
11. Avoid liquid spillages on the product. This may cause electric shock, fire hazard or
product malfunction.
12. Never attempt to service this product yourself. This product contains no serviceable parts.
Refer all servicing requirements to the Meyertech Service Centre or appointed Meyertech
Service Agent
13. Do not operate this product if
13.1. Any product power leads are damaged.
13.2. If the product has been exposed to rain.
13.3. If the product has been dropped or the assembly has been damaged.
13.4. If liquid has been spilt on the product.
13.5. If the product has malfunctioned or is not operating to its functional specification.
14. This product must only be operated with the power supply provided or if supplied without
a power supply, by the type of power source indicated in the specification.
15. Follow all warnings and instructions marked on the product and in this manual.
.
WARNING
:
This product may be used to switch hazardous mains voltages. When working
on this product use extreme caution and observe Health and Safety at work practices.
THIS PRODUCT MUST BE EARTHED!
!
