ZSC-1000 User Manual.doc
Issue 18
Page 18 of 46
M
E
Y
E
R
T
E
C
H
L
I
M
I
T
E
D
Z
S
C
-1
0
0
0
ZVK Extra
Baud Rate
Defines the baud rate at which the ZVK port communications occurs.
Valid values are 1200, 2400, 4800, 9600, 19200, 38400,57600 and 128000.
Default = 9600
RS485
Future feature to select 2-wire RS485 communications.
Default = Off (4-wire RS422)
Fast Polling
Removes the pacing of commands, to give a slightly faster connection to devices on this port.
May cause problems with some older keyboards
Default = On
ZVM Port
MAC address
The address to which the unit will respond to polls on this port
Default = 1
Terminated
The state of the 120R line terminator
Default = On
Polled
To indicate that the unit should expect to be polled. If On the unit will wait for a poll before transmitting any
information
Default = Off
Controller
To indicate that the unit is to make the decision on telemetry control from operators. If set to off the unit will
forward control request messages to the device on the ZVM port.
Default = On
