ZSC-1000 User Manual.doc
Issue 18
Page 25 of 46
M
E
Y
E
R
T
E
C
H
L
I
M
I
T
E
D
Z
S
C
-1
0
0
0
Monitor (1 – 200)
Formatting of OSD for each Monitor
Display
Text Off:
No OSD shown
Time/Date Only:
Show clock, but no camera caption
Caption Only:
Show camera caption only
Time/Date and Caption: Show clock and camera caption
Default = Time/Date and Caption
Position
Select Top for the first line of the screen, Bottom for the last
Default = Top
Colour
Black or White
Default = White
Input trunks
Input trunks are the video paths from a remote site to this site. For each input trunk, in the range 0 to 383, the
following can be defined.
Note
: The last trunk should be followed by a ‘dummy’ entry with site set to 0. Gaps should not be left in the
trunk tables as any ‘dummy’ or blank entries in the list are treated as the end of the list.
Site
The site that the trunk connects
Default = 0
Input
Matrix input at the local site that takes the input trunk
Default = 0
Trunk group
Assign a group between 0 and 16 to restrict usage of a trunk(s) to operators with access rights to that group.
Internal events (alarms, sequences etc) & operators without access rights assigned use Group 0.
Default = 0
Dialup address (alternative use of Trunk group)
On older systems, remote sites may be designated as ‘Dialup’ (see
Dialup Sites
). For trunks from dialup
sites, the Trunk group value is used as an address for the dialup device.
Default = 0
