ZSC-1000 User Manual.doc
Issue 18
Page 35 of 46
M
E
Y
E
R
T
E
C
H
L
I
M
I
T
E
D
Z
S
C
-1
0
0
0
Max positions
The number of positions in the sequence in the range 2 – 32.
A value of 0 disables the sequence. Sequence commands for disabled sequences will be forwarded on to the
local matrix.
Default = 0
Dwell
The hold/dwell time between positions in the sequence.
In the range 1 - 65534 in units of seconds.
Default = 3
Static
The definition of the components of a sequence position.
Camera
Camera address. This will be checked against the Camera Mapping table.
Default = Po 1
Site
Site address.
Default = 0
Preset
Where no preset is required (or the camera is static), the number should be configured as 255. For
the Home position, the preset 0 should be entered.
Default = 255
