ZSC-1000 User Manual.doc
Issue 18
Page 41 of 46
M
E
Y
E
R
T
E
C
H
L
I
M
I
T
E
D
Z
S
C
-1
0
0
0
Camera Barring
Camera barring allows camera ranges, either locally or across sites, to be barred to some operators.
When a camera is included in one of the 20 ranges, it can only be selected by operators who meet the priority
criteria.
To make a camera available to several individual priorities, it can be included in more than one range.
When a barred camera is selected, as well as notifying the keyboard, the site controller will either leave the
current monitor selection, or switch to a fixed input. This behaviour is defined in the
Enables
section.
Note :
Camera barring does not apply to the highest priority level of 9.
For each camera bar, in the range 0 to 19
Site
The site where the cameras to be barred are located.
Default = 0
First Camera
The first camera number in the range
Default = 0
Range
The range of the cameras being barred
Default = 0
Priority
Either :
The lowest priority user that can access these cameras
Or :
The exact priority required to access these cameras
Default = 0
Exact Priority Only
If enabled, the exact priority level specified is required to control the cameras
Default = Off
