4
、
REAR WHELL COMPONENT
28
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251300-071000 Non standard nut M12×1.5
(
chromed
)
5
110N.m
2
1230100-386000 180/55R17(CM638)Rear tire(environmental/TL)
1
3
1094200-047000 ZT310
-
VX single rocker arm bright black rear wheel
1
4
1260100-238000 ZT310-R1 rear wheel sign spring
1
5
1210142-000100 ZT310-R1 single rocker black rim sign
1
6
1184200-155000 ZT310 tire pressure wireless built-in sensor
1
PROCEDURE:
●
Rear wheel assembly
Remove the 5 nuts with a 200N torque wrench and a 19# gauge sleeve.
Support the vehicle horizontally and let the rear wheels leave the ground.
Remove the rear wheel assembly.
Extend the tool from the left to remove the rim sign
⑸
from the rim and remove the plaque spring
⑷
from the
placard
⑸
.
●
Bosch EFI: Tire pressure wireless built-in sensor
Remove the tire pressure wireless built-in sensor
⑹
built-in valve cap
①
Use a tool to release the air, Then use
a professional tire puller to remove the rear tire
⑵
. Be careful to avoid the tire pressure sensor. Finally, use a 12#
torx wrench to remove the valve nut
②
and the flat washer
③
, and then remove the tire pressure sensor.
●
Maintenance
Tire: Check regularly the tire on cracks and air pressure.If the tire is ware to the marker, change the tire with
same specification. See details in user manual. Ingradiant of tire include semi hot melt rubber. Area with too high
temperature is not suitable. If temparature of outdoor is too low, storing the motorcycle in warm place or indoor
is suggested in order to avoid frost crack. Normal temperaturestandard 250kPa.
Rim: Check if the rim has deformation or crack. Support the rim horizontally and check if it can rotate
smoothly.
Disc brake plate: Thickness can not be less than 4mm. If not, change it.
CAUTION:
●
Be careful while disassembling the tire and rim in case of damages on the components.
●
After changing the tire, check air proof performace and dynamic balance.
●
Disqualified tire repair liquid might corrode the rim and cause safety risk.
●
Not enough tire pressure can cause abnormal wear and tare. Too high pressure in summer might have
possibility of tire bursting.
Fig.5 Rear wheel, swinging
arm component
Rear wheel component