8
、
FUEL TANK COVER COMPONET
88
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non
-
Standard bolt m6×16 (304 stainless steel)
6
2
1274100-057095
Flanging bushing φ6.2×φ8.4×3.5+φ14×1.5
6
3
1244100-052000 Buffer rubber of flanging bushing
(
φ8.5×φ14×1
)
6
4
1224200-119000 ZT310
-
V fuel tank middle decoration cover
1
5
1184200-100000 ZT310 dual port usb charging cable
1
6
1244200-109000 ZT310 dual port universal usb charging cable cover
1
After sale
Fuel tank front trim cover
Fig.5 FUEL TANK
COVER COMPONET
PROCEDURE:
●
Fuel tank middle decorative cover
Using 4# inner hexagon socket remove the bolts
⑴
separately; remove the bushing
⑵
and the cushion rubber
⑶
.
As lower left corner pictures showed , one hand is placed against the fuel tank assembly, and pulled the middle
part of the middle of the decorative cover
⑷
with another hand follow the direction of the arrow.
Pull out the bottom and then pull out the right middle b, the left lower c and the left middle d.Remove the
dicoration cover assembly.
Flip to the back to remove the nut 1 from the usb charging cable, and remove the usb charging cable from the
decoration cover.
The rubber cover
⑹
is an after-sales piece, and the charging cable has one piece.Used for replacement of the
usb charging cable cover after aging.
CAUTION:
●
The parts should be protected during the disassembly process to prevent damage to the paint surface.The
decorative cover is long and should be handled or held by both hands during.
●
Be careful not to pull the usb charging cable when removing the middle of the trim cover.
●
Install the buckles in the order of a-b-c-d, and then install the bolts.