32
GB
Special safety instructions
Use goggles and hearing protection when
using the tile cutter.
Only use the tile cutter on a fl at, stable
surface.
Ensure the water tank is always full to keep
the blade cool when cutting tiles.
Never use bent or cracked blades.
Never stop the blade by pressing the tile
cutter or by applying pressure to the side of
the blade.
Never allow the blade to be in contact with
the item to be cut - or other objects - when
starting the tile cutter.
Always use protective gloves when
handling the blade. Never put your hand
near the blade or try to remove material
from the working area while the blade is
rotating.
Never use if protective equipment is not
fi tted or does not work.
Use a push stick to feed small items towards
the blade. Never cut tiles that cannot be
handled safely.
Assembly
Push the four legs (1) into the sockets on
the frame (2) and secure them using the
fi nger screws (19) (fi g. B4).
Place the work bench (4) on the frame (fi g.
B5).
Place the plug (23) in the drain hole (3)
(shown as A in fi g. B8).
Connect the cooling water hose (15) to the
cooling water pump (15) (fi g. B6, B7).
Summary of Contents for 66157
