Figure 1.6
Reel blades
Remove the barrel and front guard with the latches. It’s best to use a block of wood to rotate the blades as
they are very sharp and may very easily cut your hands or fingers.
Make sure the reel spins freely. The reel blades will have light contact with the knife blade. This will ensure
proper cutting action and will help maintain a sharp edge. Please refer to the adjustment section if the reel
blades need to be adjusted.
Note:
If there is damage to the reel blades that will not allow for smooth rotation, the machine will need to be
serviced by an authorized service technician. Damage from rocks and other hard objects are not covered under
warranty. New parts must be purchased and installed properly.
Page 9