background image

 

4

Usage Precautions

S

  Interference  with  other  electrical 

equipment

In  consideration  of  safety,  the 

Q

  has 

been designed to minimize its emission of 
electromagnetic waves and to suppress inter-
ference from external electromagnetic waves. 
However, equipment that is very susceptible 
to interference or that emits powerful electro-
magnetic waves could result in interference 
if  placed  nearby.  If  this  occurs,  place  the 

Q

 and the other device farther apart.

With  any  type  of  electronic  device  that 
uses  digital  control,  including  the 

Q

electromagnetic  interference  could  cause 
malfunction, corrupt or destroy data and re-
sult in other unexpected trouble. Always use 
caution.

S

 Cleaning

Use a soft cloth to clean the exterior of the 
unit if it becomes dirty. If necessary, use a 
damp cloth that has been wrung out well to 
wipe it.
Never use abrasive cleansers, wax or solvents 
such as alcohol, benzene or paint thinner.

S

 Breakdown and malfunction

If the unit becomes broken or malfunctions, 
immediately disconnect the AC adapter, turn 
the power off and disconnect other cables. 
Contact the store where you bought the unit 
or ZOOM customer service with the follow-
ing information: product model, serial number 
and specific symptoms of breakdown or mal-
function, along with your name, address and 
telephone number.

S

 Copyrights

Windows is a trademark of Microsoft Corpo-
ration (USA). Apple, Macintosh, iPad, Quick-
Time and the QuickTime logo are registered 
trademarks or trademarks of Apple Inc. in the 
USA and other countries. iOS is a registered 
trademark  or  trademark  of  Cisco  Systems, 
Inc. (USA). The SD, SDHC and SDXC logos are 
trademarks. HDMI (High-Definition Multime-
dia Interface) and 

 are trademarks of 

HDMI Licensing, LLC. Other product names, 
registered trademarks and company names 
in  this  document  are  the  property  of  their 
respective companies.

Recording from copyrighted sources, includ-
ing CDs, records, tapes, live performances, 
video works and broadcasts, without permis-
sion of the copyright holder for any purpose 
other than personal use is prohibited by law.
Zoom  Corporation  will  not  assume  any  re-
sponsibility related to infringements of copy-
rights.

Declaration of Conformity

For EU Countries

FCC regulation warning (for U.S.A.)

Note: This equipment has been tested and found 
to  comply  with  the  limits  for  a  Class  B  digital 
device,  pursuant  to  Part  15  of  the  FCC  Rules. 
These limits are designed to provide reasonable 
protection  against  harmful  interference  in  a 
residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, 
if not installed and used in accordance with the 
instructions,  may  cause  harmful  interference 
to radio communications. However, there is no 
guarantee  that  interference  will  not  occur  in  a 
particular  installation.  If  this  equipment  does 
cause harmful interference to radio or television 
reception, which can be determined by turning 
the equipment off and on, the user is encouraged 
to try to correct the interference by one or more 
of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment 

and receiver.

•   

Connect  the  equipment  into  an  outlet  on  a 
circuit different from that to which the receiver 
is connected.

•  Consult the dealer or an experienced radio/TV 

technician for help.

Summary of Contents for Q2N

























Reviews: