Entering Patterns Using Step Input
ZOOM RT-223
28
Step recording of drum
track
This section describes how to record the drum
track using step recording.
1.
In pattern mode, select an empty
user pattern, and select a drum kit,
as necessary.
The selection method for pattern and drum kit is
the same as in real-time recording (
→
p. 22).
When you select an empty pattern, the indication
“EMPTY” appears on the display.
HINT
If there is no empty pattern, delete an
unneeded pattern first (
→
p. 33).
2.
Press the [FUNCTION] key and then
pad 5 (QUANTIZE).
The current quantize setting appears on the
display. The minimum unit (shortest note) for step
recording is determined by this setting.
3.
Use the VALUE [+]/[-] keys to select
the quantize value (step length) from
the following values.
4...... Quarter note
24....... Sixteenth triplet note
8...... Eighth note
32....... Thirty-second note
12.... Eighth triplet note 48....... Thirty-second triplet
note
16.... Sixteenth note
Hi ....... 1 tick (1/96 of quarter
note)
4.
Press the [FUNCTION] key once
more.
The quantize value is set, and the unit returns to
pattern mode.
5.
Press the REC [
O
] key.
The REC [
O
] key lights up and pattern step input
becomes possible.
6.
To enter a note, press the pad
corresponding to the sound, and
then press the [REPEAT/STEP] key.
The note is entered, and the input position
advances by one step.
HINT
You can check the current position in the
pattern on the display (measure/beat/tick).
7.
To enter a rest, press the [REPEAT/
STEP] key only.
If you press the [REPEAT/STEP] key without
pressing a pad, no note is entered, and the input
Quantize value
QNTIZE
16
Pad
RT223(E).fm 28 ページ ２００５年５月２６日 木曜日 午後１２時３分
