UIB-02 ONLINE MANUAL
14
S E T T I N G T H E M A C I N T O S H C O M P U T E R A N D M R S S E R I E S
T O T H E O F F L I N E S T A T E
If you simply unplug the USB cable or turn power to the MRS series off while the
Macintosh and MRS series are in the online state, computer operation may become
unstable, and serious damage to files may occur. Always perform the steps listed below
to terminate the USB connection between the Macintosh and the MRS series.
1.
Drag-and-drop the volume icon for the MRS series internal hard disk
mounted on the desktop into the trash.
The Macintosh computer and the MRS series are now offline. In this condition, you
can safely terminate the USB connection.
[HINT]
When using MacOS X, it suffices to drag-and-drop either the “MSR-USR” or the “MSR-FAC”
icon to the trash to terminate the USB connection.
2.
Press the [POWER] switch of the MRS series.
The indication “PowrOFF ENT/EXIT” appears on the display of the MRS series.
3.
Press the [ENTER] key of the MRS series.
Power to the MRS series is turned off. When you turn the power on again in this state,
the unit starts up normally.
4.
If necessary, disconnect the USB cable.
[HINT]
This procedure must be followed every time you wish to terminate the USB connection between
the Macintosh computer and the MRS series to turn the MRS series off.
P R O J E C T B A C K U P / R E S T O R E
You can copy a project from the MRS series mounted as a local disk on the desktop to
the hard disk of the Macintosh computer, for creating a backup. A backed-up project
can be restored to the MRS series at any time.
Backing up a project
Copy project data from the internal hard disk of the MRS series to the hard disk of the
Macintosh computer as follows.
