2B Installing the ZoomAir PC Card under Windows NT 4.0
27
computers on the network.
Click on OK.
8
8
A Bindings Changes dialog box will appear. Click on Next.
You will see a message: NT is ready to start network. Click
on Next.
9
9
The Network Setup Wizard will reappear, with a space to
enter the name for your Workgroup. Type in a Workgroup
name.
This must be the same name for every computer on
the network.
Click on Next and then on Finish. When you are prompted
to restart the computer, restart it.
At this point, you should reinstall your latest NT Service Pack.
This ensures that any Service Pack files that were overwritten in
this installation will be restored to the latest version.
The PC Card installation is complete. Continue with Running the
ZoomAir Setup Program on page 29.
Installing on an Existing Network
1
1
In the Network dialog box select the Adapters tab. Click on
Add.
2
2
In the Select Network Adapter dialog box, click on Have
Disk. In the Insert Disk dialog box, type the letter of the
drive you are installing from (typically a:\ for floppy diskette
installation or d:\ for CD disc installation) and click on OK.
3
3
The Select OEM Option dialog box will appear. Make sure
Zoom Telephonics 802.11 - PCMCIA card is selected and
click OK. The drivers will be updated; you may be asked to
insert the Windows NT installation CD.
4
4
Zoom Telephonics 802.11 Adapter Setup will display: