background image

ZT 37 -250 

PREMIER AL Local Panel 

Repeater Application, 

Installation and 

Commissioning Manual 

For the PREMIER AL 

 

Contents 

 

1.0 Introduction ........................................................................................................... 2 
2.0 Cabinet 

Specifications ........................................................................................... 3 

2.1 

Repeater Panel Order Codes & Descriptions ..................................................... 3 

2.2 

 Small Repeater Semi-Flush Bezel..................................................................... 4 

2.3 

 Small Repeater Fully Flush Bezels ................................................................... 5 

3.0 Hardware 

Specifications........................................................................................ 6 

3.1 

User Controls & Indications (General Overview).............................................. 7 

3.2 

Printed Circuit Board Viewed from Inside the Cabinet ........................................ 9 

4.0 Cabinet 

Installation................................................................................................ 9 

5.0 

Display Address Setting ...................................................................................... 11 

6.0 Commissioning 

Procedure................................................................................... 11 

Appendices .................................................................................................................... 14 

i Technical 

Specifications...................................................................................... 14 

ii  Other Relevant Documentation ........................................................................... 14 
iii  

Repeater Node DIL Switch Settings ................................................................ 15 

 
 

 

Summary of Contents for ZT37 -250 REP-AL/P
















Reviews: