19
Upgrading firmware
1. Put the firmware issued by the manufacturer to store in SD card.
2.
Follow the manufacturer’s instructions to create a SD card containing the firmware.
3. Insert the SD card into the TV box before you power it on. Then reboot to automatically
update and the status indicator will blink in red.
4. After the upgrade is complete, the status indicator will not blink. The TV box will boot into
the Home screen, then you must eject the SD card and remove the upgrade folder,
otherwise next time you Power on, you will boot into re-upgrading status.
Maintenance
Clean the unit with a soft and dry cloth; be careful not to wipe it with anything abrasive.
Never use alcohol, benzene, thinner, cleaning fluid or other
chemicals. Don’t use compressed
air to remove dust.
Product Specifications
System Properties
Operating System: Android 4.0
Processor: A10
Architecture: ARM Cortex-A8
Speed: 1GHz
RAM Memory: DDR 512M
Storage memory
Built in memory: 2GB
Supports micro SD card: up to 32GB SDHC
Media File Format supported
Audio: MP3, WMA, AAC, WAV, OGG, APE, FLAC, M4A,
MID, MP4,
Photo: JPG, BMP, GIF, PNG
Video:MKV/ISO/VOB/RMVB/Divx/ASF/AVI/DAT/3GP/DIVX/FLV/M2TS/M4V/MKV/MOV/MP4/MPE
G1/MPEG2/RM (RV8/RV9)/RMVB/WMV/TS/BD/DVD
Connectivity
Audio: phone jack (L/R Stereo audio), SPDIF, HDMI1.4
LAN : RJ45 (10/100MB)
Wireless connectivity
Wi-Fi : Built-in, 11b/g/n
Power supply
DC 5.0V, 2.0A
Physical properties
Dimension: 160*145.2*31.1mm (approx.)
Weight: 206g (approx)
※
Design and specifications are subject to change without prior notice.
