7
※If lime algae or calcium components are stuck, remove them using a special
cleaner or Hydrochloric Acid.
※Even small scratches can cause water leaks and malfunctions, so if you
find them, replace them immediately.
* Impellers and O-rings are treated as consumables and are not covered by
the warranty.
* We recommend that you apply silicone grease (sold separately).
4. Use a soft-bristle toothbrush to remove any dirt from each part.
5. Check the impeller if there any damage.
6. Check the O-ring if there any damage.
7. Reassemble the pump in the reverse order of steps 1-3, and install it in the
original place.
8. Turn on the power and check for any abnormalities for a while.
