background image

1

※Does not include controller power consumption.

Attention

Model

Pump Max Power Consumption

Rated voltage / frequency

Max Flow

Outlet hose inner diameter /

 PVC inner diameter 

DC3000

25W(±5%)

100-240V 50/60Hz

3000l/h

16mm/20mm

DC5500

34W(±5%)

Flow

Flow

100-240V 50/60Hz

5500l/h

16mm/20mm

Body Size(cm)

W16×D9.1×H18

W18.5×D10.1×H19.3

DC8000

68W(±5%)

100-240V 50/60Hz

8000l/h

20mm/20mm

W18.5×D10.1×H19.3

Total Head(m)

Total Head(m)

Total Head(m)

DC3000

DC5500

Flow

DC8000

●Specification

0.5

500 1000 1500 2000 2500 3000

1000

2000

3000

4000

5000

6000

3500

1.5

2.5

1

2

3

1.5

2.5

1

0.5

0

0

2

3

3.5

4

4.5

5

●Before Use

・Be careful not to let the pump run idle due to a drop in water level.
・  Be careful that do not let sand and foreign matter being sucked into the main unit.

   This can cause serious damage. The warranty is not covered in this case.

・ Do not use with corrosive or abrasive liquids.
・ When holding the pump, do not lift the pump by the cord.
・ Perform regular cleaning to prevent lime, algae, calcium and moss from adhering.
・ Be sure to turn off the power before connecting the adapter connector to the controller.

Please read the following precuations carefully before using the pump

※The total head is the length of the pipe (hose) and varies depending on the pipe
   friction and the resistance when connecting equipment.

・We do not compensate for living bodies by stopping the pump. Please use it after 

  consent beforehand.

・This product is for underwater use only.

1000 2000 3000 4000 5000 6000 7000 8000 9000

1

0

0

2

3

4

5

6

Summary of Contents for 10000













Reviews: