3
Align the protrusions and insert
Tighten the connection cover
2. Connect the joint between the pump and controller referring to the following
connection method.
3. Connect the adapter to the controller.
Make sure to have a "drip loop" between the outlet and the
controller.
"Drip loop" is mean that the part of the cord is below the location
of the outlet, as it can prevent water from running down the
cord and coming into connect with the outle
4. Connect the power cord to the adapter.
5. Make sure that the main unit is underwater and that the inside of the main unit
is filled with water before connecting the plug to the outlet.
※Before connecting, make sure that the power is not connected to the outlet.
Attention
How to Connect
