3
●Filtration Tank
●Installation Method
Screw
The sump in which the protein skimmer is installed should have a structure
that allows the breeding water to pass through a physical filter
(such as a wool mat),please make sure it can pass through the inside of
the protein skimmer without any trash.
Large garbage (such as live rock fragments and coral sand) may cause
clog and lead to pump failure.
Also, for those rearing with the Berlin System (protein skimmers only), similarly,
physically treat with wool or set up a sedimentation tank in the filtration tank.
【Good Example】
【Good Example】
【Bad Example】
Overflow Pipe
Skimmer
Wool mat/
Cotton Filter
Overflow Pipe
Skimmer
Settling Tank
In the market available glass tank,
Physical filter (Wool mat) and filtration tank
without sedimentation tank
Overflow Pipe
SKimmer
1.
Remove the four screws on the bottom and remove the bottom plate.
2.
Slide the pump into the pump mount and attach it.
Please be careful.When using protein skimmers, it is not possible to use
mucosal protective agents or other products that increase the viscosity
of water.
Be very careful not to let the pump run idle due to a drop in water level.
Please clean the body and the pump completely before using.
Introduction
