38
3
M
G
1.Insert the front frok into the main body.
2.Remove the screw from the handlebar(G),then insert it into the
front fork,tighten it with screw(20N*M).
3.Remove the screw from the main body(A),insert the seat(O) on the
main body,then screw up(20N*M).
4.Remove the front screw from the handlebar, insert the front
basket(M) to the handlebar, and tighten it with screw(3N*M).
H
click
press and hold
pop-up
I
1.Insert the front protectiong ring(B) into the handlebar stem, and push the back
parts onto the seats(H). Ensure both the front and back have securely lacked into
pasition.
1.Insert the head rest(K) into the back of the seat, make sure the button is pop-up.
2.Open the canopy(P) by press and hold the button, then insert the canopy(P)
into the head rest.
Make sure the button on canopy (P) is pop-up.
3.Remove the screw from the bottom pushbar(E-1),and insert the top pushbar(E-2)
into the bottom pushbar,then tighten them with screw(10N*M).
4.Insert the rear basket(I) into the back of the main body.Make sure the rear
basket locks into the position on the rear axle(F) and main body.
5.Place the bag(L) on the top pushbar(E-2), and put the string of the bag(L)
on the pushbar(E-2)’s hook.
L
3
M
G
1.Insert the front frok into the main body.
2.Remove the screw from the handlebar(G),then insert it into the
front fork,tighten it with screw(20N*M).
3.Remove the screw from the main body(A),insert the seat(O) on the
main body,then screw up(20N*M).
4.Remove the front screw from the handlebar, insert the front
basket(M) to the handlebar, and tighten it with screw(3N*M).
H
click
press and hold
pop-up
I
1.Insert the front protectiong ring(B) into the handlebar stem, and push the back
parts onto the seats(H). Ensure both the front and back have securely lacked into
pasition.
1.Insert the head rest(K) into the back of the seat, make sure the button is pop-up.
2.Open the canopy(P) by press and hold the button, then insert the canopy(P)
into the head rest.
Make sure the button on canopy (P) is pop-up.
3.Remove the screw from the bottom pushbar(E-1),and insert the top pushbar(E-2)
into the bottom pushbar,then tighten them with screw(10N*M).
4.Insert the rear basket(I) into the back of the main body.Make sure the rear
basket locks into the position on the rear axle(F) and main body.
5.Place the bag(L) on the top pushbar(E-2), and put the string of the bag(L)
on the pushbar(E-2)’s hook.
L
