Zorlu ADB-9010, User Manual

Peel protective papers out from the inox devices after assembly.

Speed Choice 

The device has 3 degrees of ventilation. According to the cooking and frying steam, you can 
choose low-middle-high ventilation levels.  Buttons on the front panel are used for turning the 
device on. The models with eletronic controllers have automatic timers. 15 minutes automatic 
timer is turned on, when pressed any of the buttons, which starts the motor up, more than 2 
seconds. When timer starts, display will signal and after 15 minutes motor will automaticly stop. 
Please turn on hob and hood at the same time to activate circulation. This will provide positive 
effect on vacuum power. Let the device run for a while after cooking process is finalised, thus the 
remaining smell and steam will be absorbed.

Cleaning Periods of Aluminum Filter 

Filter should be cleaned when “C” signal appears on the Display or each 2-3 weeks (in accordance 

with the usage frequency). After cleaning and replacing filters to their places,    button should be 

pressed for more than 3 seconds (when the product is off) in order to remove the “C” signal. “E” 

signal will appear on Display and product will start working at normal position. If you want to 

continue using your product without removing “C” signal, active speed will appear for 1 second 

when you press   

        button, then “C” signal will appear once more and the motor will continue operating. 

Illumination

The product has 2 lamps and one lamp button to operate illumination. Press lamp button in 

order to start illumination.

3

17

Usage of 3 Speed Digital Control