Zotac GAMING MEK1 User Manual Download

Page: 12 / 17

ZOTAC GAMING MEK1 Gaming PC

3. Connecting to a network device

Connect one end of a network cable to the LAN port on the system rear panel and the other

End to a hub or switch.

4. Connecting to USB 3.0/ USB2.0 devices

Connect USB 3.0/ USB 2.0 devices such as external hard drives, SSDs and flash drives to

the ports.

Connecting WiFi antenna modules

Connect WiFi antenna modules to the WiFi antenna connectors.

6. Connecting the Keyboard or Mouse

Connect keyboard or mouse to the USB or PS/2 port.

7. Turning on the system

Plug the power cord into the power connector firmly and connect the other end to AC outlet.

Then press the power switch on the front panel to turn on the system.



When your ZOTAC GAMING MEK1 Gaming PC is not in use, unplug the power socket from

AC outlet to save on power consumption.

Summary of Contents for GAMING MEK1


















Search results

Summary of Contents for GAMING MEK1

Reviews:

Related manuals for GAMING MEK1

Brands by name

Popular brands

Zotac GAMING MEK1, User Manual

Search results

Summary of Contents for GAMING MEK1

Reviews:

Related manuals for GAMING MEK1

Brands by name

Popular brands