4
ZOTAC NVIDIA MCP73V/PV Motherboard
q
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the BIOS can
automatically configure all the boot and plug-and-play compatible devices or if you can
manually select IRQ, DMA, and memory base address fields. Select
[Auto(ESCD)]
if you want the BIOS to automatically populate these fields. If you select
[Manual]
so
you can assign the resources,
IRQ Resources
is enabled for input.
q
IRQ Resources
To enable this field for input, set
Resources Controlled By to [Manual]
. With
this field enabled, press
Enter
to see options.
Use Legacy ISA for devices compliant with the original PC AT Bus specification. Use
PCI/ISA PnP for devices compliant with the plug-and-play standard, whether designed
for PCI or ISA Bus architecture.
q
PCI/VGA Palette Snoop
This function on the PnP/PCI Configuration menu allows you to enable or disable the
Palette Snoop function.
q
Maximum Payload Size
This function on the PnP/PCI Configuration menu allows you to set the maximum TLP
payload size (in bytes) for the PCI Express devices. Use the
Page Up
and
Page
Down
keys to scroll through sizes or enter the number using the keyboard numbers
or use the + and – keys to go up and down the list of sizes.
