16
1. Audio Configuration
Enable
: choose to enable the audio or not
Encode Type
: set audio encode type and the device will
reboot automatically after change (default AAC; MP3,
G.711A, G.711U optional)
Sample Rate
: set sample rate and the device will reboot
automatically after change (default 48000; 16000, 32000
and 44100 optional)
Sample Bits
: default 16 (the parameter is only and cannot
be modified)
Bit Rate
: set audio compressing code rate (default
64Kbps; 32 Kbps, 48 Kbps, 96 Kbps, 128Kbps optional)
Channel
: (default Stereo; Mono optional)
Input Volume
: (default 4; 1-10 optional)
Note: Click “Save”, it will remind “Success! Restart to
take effect (except input volume)” in the bottom right
corner of the page, and then please reboot the camera to
make new setting effect.
2. Video Configuration
1) Video Encode
Stream
: Different video output mode settings use
different streams (Main stream and Sub stream).
Compression Format
: Set the video compression format,
save and reboot to take it effect (Main/ Sub stream default
H.264; H.265 optional)
Profile
: (Main/ Sub stream default HP; BP, MP optional)
Image Size
: Set video image resolution, save and reboot
to take it effect (Main stream default 1920*1080;
1280*720, 640*480 optional. Sub stream default
320*180; 320*240, 640*360, 640*480, 1280*720,
1920*1080 optional)
Rate control
: set rate control mode, save and reboot to
take it effect (Main /Sub stream default CBR, VBR
optional)
Image Quality
: Set the image quality, image quality can
be changed only when rate control is variable bit rate
(Main stream default best, Sub stream default better; best,
better, good, bad, worse, worst optional).
Bit Rate (Kb/s)
: Set the video bit rate (Main stream 4096
default; 64-12288 optional; Sub stream default
1024Kb/s,64-10240Kb/s optional)
Frame Rate (F/S)
: Set the video frame rate (Main/ Sub
stream default 25, primary stream 5-60 optional,
secondary stream 5-30 optional)
I Frame Interval
: Set the key frame interval (Main/ Sub
stream 75 default; Main stream 1-300 optional, Sub
stream 1-150 optional)
I Frame Min QP
: Set keyframing minimum QP (Main/
Sub stream 20 default; 10-51 optional).
Stream Name
: When receiving RTSP or RTMP stream,
the user can modify the stream name; Main stream
live/av0 default, Sub stream live/av1 default
Note: Usually reserve LIVE, but only modify the latter
part.
Click the “Save” button to display the “saved
successfully!” message, then settings will take effect.
2) Stream Publish
Enable
: To turn on/ off the Main/ Sub stream
Protocol Type
: Main/ Sub stream applies RTMP protocol.
(Main/ Sub stream default RTMP; RTSP, SRT optional)
Host Address
: Server IP addresses (default 192.168.5.11)
Host Port
: Server port number (default 1935,0-65535
optional)
Stream Name
: Choose a different stream name (default
live/av0, live/av1 optional)
Username
: Set the username.
Password
: Set the password.
