8
Only use approved accessories.
For pluggable equipment, the socket-outlet
shall be installed near the equipment and shall
be easily accessible.
Don’t rely on your phone as a primary device
for emergency communications.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is
1.6
W/kg and the highest SAR value for
this device
when tested at the head was
1.169
W/kg*,
and
when tested at the body was
0.589
W/kg*
with
15
mm distance. As mobile devices offer a range of
functions, they can be used in other positions, such as on
the body as
described in the user manual**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the device
to ensure it only uses the minimum power required to
communicate with the network.
* The tests are carried out in accordance with
IEEE
1528-2013, ANSI C95.1:1992, IEEE C95.1:1991.
** Please see body worn operation
in the user manual.
