Zte AT&T MF279 User Manual Download

Page: 23 / 38

Yes, you can change your Wi-Fi network name and password using the AT&T Home Base Manager.

From any connected device, enter

http://att.wirelessinternet

directly into your browser address field

and log in using "attadmin" (or your customized login). Go to

Settings > Wi-Fi > Basic

to change your

network name and

Settings > Wi-Fi > Security

to change your password.

How do I know how much data I've used?

To check your data plan usage for your current billing cycle, go to

att.com/myatt

. You can also view your

data usage and the days remaining in your billing cycle using the AT&T Home Base Manager. From any

connected device, enter

http://att.wirelessinternet

directly into your browser address field and log in

using "attadmin" (or your customized login), and go to

Data Used

Once I've reached the maximum amount of data in my plan, can I continue to use my AT&T Home

Base for data?

Yes, but overage charges will apply. To upgrade your data plan, visit

att.com/myat

Troubleshooting

General

Problem

Possible Solution

None of the LEDs

are illuminated



Make sure there is AC power to the AT&T Home Base. Do not connect

to an AC outlet controlled by a wall switch.



Slide the

ON/OFF

button to the

position on the back of the AT&T

Home Base until the Power light stays solid green.

Red signal strength

indicator



Move your device to another area with sufficient network signal (Green

or Blue Signal Strength light).

Blinking Red signal

strength indicator



nano-SIM card is missing or not installed properly.

1) Remove the bottom of the device and back-up battery.

2) Locate the nano-SIM card slot and insert the nano-SIM card into the slot

until secure. The nano-SIM card will click and lock in place when properly

installed in the correct orientation.



nano-SIM card may be invalid or damaged and need to be replaced. For

a replacement nano-SIM card, take your AT&T Home Base to your local

AT&T store. Or, call AT&T Customer Care at 1-800-331-0500.

nano-SIM Card

doesn't work in my

mobile device

The nano-SIM card provided with your AT&T Home Base is intended for use

only in your specific AT&T Home Base and cannot be used in a mobile

handset.

Summary of Contents for AT&T MF279







































Search results

Summary of Contents for AT&T MF279

Reviews:

Related manuals for AT&T MF279

Brands by name

Popular brands

Zte AT&T MF279, User Manual

Search results

Summary of Contents for AT&T MF279

Reviews:

Related manuals for AT&T MF279

Brands by name

Popular brands