42
43
4 . Press the WPS button on the wireless router, and the access
point will recognize your phone and add it to the network .
Method Two: PIN
1 . From the home screen, tap
Settings Wi-Fi
.
2 . Slide the
Wi-Fi
switch to the
On
position .
3 . Tap
Advanced WPS Pin Entry
.
4 . The WPS PIN displays on the screen . Enter the PIN into the
access point’s setup page .
After entering the PIN, your phone automatically finds the access
point and configures the connection.
Note:
For detailed information about the WPS feature of the
access point, please refer to its documentation .
Adjusting Advanced Wi-Fi Settings
1 . From the home screen, tap
Settings Wi-Fi
.
2 . Slide the
Wi-Fi
switch to the
On
position .
3 . Tap
Advanced
to adjust the following settings .
•
Install certificates:
Install certificates needed for
connecting to certain Wi-Fi networks .
•
Wi-Fi Direct:
Use the Wi-Fi Direct feature . See Connecting
to Networks and Devices – Using Wi-Fi Direct .
•
WPS Push Button:
Connect to a WPS network via the push
button method .
•
WPS Pin Entry:
Connect to a WPS network via the phone
PIN method .
•
Connect to AT&T Wi-Fi spot:
Slide the switch to enable or
disable automatic connection to an AT&T Wi-Fi spot when
one is available .
Using Wi-Fi Direct
Wi-Fi Direct allows Wi-Fi devices to connect to each other without
the need for wireless access points (hotspots) .
Note:
Activating this feature will disconnect your current Wi-Fi
network connection .
1 . From the home screen, tap
Settings Wi-Fi
.
2. If Wi-Fi is off, slide the
Wi-Fi
switch to the
On
position .
3 . Tap
Advanced Wi-Fi Direct
. Your phone will search for
other devices enabled with Wi-Fi Direct connections .
4 . Tap a device name under Peer devices to connect with it . The
other device will receive a Wi-Fi Direct connection prompt and
need to accept the request for connection . Both devices may
need to enter a common PIN . If prompted, tap
ACCEPT
.
5 . Once connected, the device is displayed as “Connected .”
Connecting to Bluetooth Devices
Bluetooth is a short-range wireless communication technology .
Phones or other devices with Bluetooth capabilities can exchange
information wirelessly within a distance of about 30 feet . The
Bluetooth devices must be paired before the communication
is performed .
Turning
Bluetooth
On/Off
1 . From the home screen, tap
Settings Bluetooth
.
2 . Slide the
Bluetooth
switch to the
On
or
Off
position .
When Bluetooth is on, the icon will appear in the status bar .
Your phone will be visible to nearby devices while Bluetooth
Settings is open .
CONNECTING TO NETWORKS AND DEVICES
CONNECTING TO NETWORKS AND DEVICES
Summary of Contents for Blade Spark AT&T
Page 1: ...User Guide ...
Page 70: ......