Parameter
Description
DTIM Interval
The value range is from 1 ms to 5 ms. The default is 1 ms.
Fragment Threshold
When a packet exceeds the fragment threshold, it is divided into
multiple packets. Excessive packet fragments may affect the
network performance, so the fragment threshold should not be set
too big.
It is recommended to set the threshold to an even value. An odd
value is reduced by one to be an even value. The default is 2346.
3.
Click
Submit
.
IEEE 802.11n Only Configuration
To configure IEEE 802.11n Only, perform the following steps:
1.
Choose [
Network→ WLAN→ Basic
].
2.
Select
Enabled
,
Disabled
or
Scheduled
from the
Wireless RF Mode
drop-down list. Select
IEEE 802.11n Only
from the
Mode
drop-down list, as shown in
Figure 25 IEEE 802.11n Only Configuration
lists the IEEE 802.11n Only parameters.
40
Summary of Contents for H298N
Page 68: ...Figure 49 IPv6 Routing Table 68 ...
Page 76: ...Figure 55 ALG 3 Click Submit The ALG setting is configured 76 ...
Page 84: ...Figure 60 SIP Accounts 2 Click to modify the SIP accounts as shown in Figure 61 84 ...
Page 133: ...WEP Wired Equivalent Privacy WLAN Wireless Local Area Network WPA Wi Fi Protected Access 133 ...
