3 Configuration Preparation
2. On the local computer, double-click
Local Area Connection
and click
Properties
.
The
Local Area Connection Properties
dialog box is displayed.
3. Double-click
Internet Protocol (TCP/IP)
. The
Internet Protocol (TCP/IP) Proper-
ties
dialog box is displayed. Set the IP address to
192.168.1.200
, subnet mask to
255.255.255.0
, and default gateway to
192.168.1.1
.
4. Click
OK
.
Postrequisite
After setting the IP address of the computer, you can run the
Ping
command to ping the
IP address 192.168.1.1. If the ping operation is successful, it indicates that the TCP/IP
configuration is correct and the computer is properly connected to the H3140.
3.2 Login
Abstract
The H3140 provides a Web-based configuration and management system. You can en-
ter a specified IP address in the address bar of Internet explorer to access the system.
Prerequisite
A computer is directly connected to the H3140, and their IP addresses are in the same
network segment.
Steps
1. Open Internet explorer, and enter
http://192.168.1.1
(default maintenance IP address
of the H3140) in the address field. Press the
Enter
key. The login page is displayed,
SJ-20210621164956-009 | 2021-12-07(R1.0)
13
Summary of Contents for H3140
Page 6: ...IV ...