26
MAC Address:
A network identifier unique to each device's hardware.
Source IP Address:
The source IP address that traffic will be filtered from.
Destination IP Address:
The internal IP address where traffic will be filtered to.
Protocol:
You can select from
None/TCP/UDP/ICMP
as the traffic type you would like to filter.
Action:
Selecting
Drop
or
Accept
will determine if the rule will allow or block traffic based on the
criteria specified.
Comment:
Here you will need to add a name or description to the rule in order to click "Apply" to
save and implement the rule.
Port Forwarding
Port Forwarding allows for specific external ports on the MF279T to be mapped to specific ports on a
specific device on the internal network. You can have a maximum of 10 Port Forwarding/Virtual Server
rules in the system.
You can
Enable
or
Disable
Port Forwarding to allow certain devices to act as virtual servers within the
internal MF279T network.
If you select
Enable
, the Virtual Server Settings will appear:
IP Address:
Enter the internal IP address (i.e. 192.168.1.101) that you would like traffic from a
specific external port directed to internally.
Port Range:
Enter the starting and ending port numbers that will be directed to the internal device.
Protocol:
You may pick
TCP, UDP,
or
TCP+UDP
traffic types to be directed.
Comment:
Enter a comment or label to be saved with this custom port forwarding rule.
Be sure to click "Apply" to confirm your configuration.
URL Filtering
You can set up content filters to restrict the access to specific websites.
Type the URL address, and then click "Apply" to add the URL address into the filtering list. The new URL
filtering item will be shown in the Current Webs URL Filters field.
UPnP
Universal Plug Play (UPnP) is a set of networking protocols that allows network devices, such as PCs,
printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other’s
presence on the network and establish functional network services for data sharing, communications,
and entertainment.
Check
Enable
and click "Apply" to enable the function.