background image

Confidential and Proprietary Information of ZTE CORPORATION 15

 

C h a p t e r 

  3 

 

Voice Calls 

 

Making a Call 

Before making a call, make sure: 

 The (U)SIM card is inserted. 

 The modem is inserted properly. 

 The telephone cable (RJ11) is connected properly. 

 The PWR light is on. 

 The RSSI light is on. 

To make a call: 

1. Pick up the handset. 

2. Key in the telephone number. 

3. You can either press

  #

 key on the telephone to send the call, or wait 4~8 seconds for the call to be 

connected automatically. 

4. Call will be connected. 

 Notes:

 

If there is no RSSI indication, the RF signal is unavailable. Change the location of the router and 
make sure nothing is blocking it. 

Making a Trunk Call 

If you are making a trunk call, add the area code as normal. 

E.g. 0396 12345678 

Making an International Call 

If you are making an international call, key in the international access code followed by the country code, 
area code and number. 

E.g. 00 11 64 12345678 

Answering the Call 

When the phone rings, pick up the handset to answer it. If the telephone has hands-free function you can 
answer the call by pressing the 

Hands-free

 button. Press the hands-free button again to end the call. 

Summary of Contents for MF613







































Reviews: