MF613 3G Wireless Router User Manual
Confidential and Proprietary Information of ZTE CORPORATION 29
The following figure shows you the WPS mode and status.
•
WPS mode
: Select PIN or PBC mode. If you select
PIN
mode, you need fill in the
Clinet PIN
which
you can get from other wireless device, or input the router’s PIN(
AP PIN
in the WPS Summary) in the
other wireless device. If you select
PBC
(Push Button Communication) mode, click
Apply
or press the
WPS Key at the rear of the router to active this function, and then you need enable the WPS function on
the other wireless device in two minutes to start authentication process with the router.
•
Client PIN
: Fill in the PIN code of the other wireless device if selecting PIN mode as the WPS Config
method.
•
WPS Status
: Show the authentication process of WPS
Firewall
MAC/IP/Port Filtering
Select
Firewall > Mac/Ip/Port Filtering
, the Mac/IP/Port Filtering is shown in the following figure:
If you select Enable, the filter settings will appear:
Summary of Contents for MF613
Page 4: ......
Page 6: ... WPA PSK Wi Fi Protected Access PreShared Key ...